BBC testing HDTV at 28.5!

[Deleted User][Deleted User] Posts: 390
Forum Member
The BBC is running a test on Eurobird 1 at 28.5, according to Jay C.

11482 V SR 14469 3/4 1920x1080 Bitrate 2250 kbps

Has anyone managed to tune in on their PCs?
I'm trying to with ProgDVB.
The service has an identity of "SERVICE_1" but I get a blank screen.

Can anyone help?

Mark
«13

Comments

  • OtisOtis Posts: 2,183
    Forum Member
    ✭✭✭
    The BBC have indeed been making sporadic HDTV engineering tests as you suggest (in collaboration with Tandberg).

    They have also been broadcasting FTA tests from the Proms in SDTV on 11.498 GHz Vertical SR:10125 FEC:3/4.

    It is anticipated that the Last Night of the Proms may be broadcast in HDTV for use in Germany.
  • FraserGJFraserGJ Posts: 1,814
    Forum Member
    ✭✭✭
    I've got the channel but its blank - signal is coming and going :cry:

    That transponder seems to be dodgy here :mad:
  • [Deleted User][Deleted User] Posts: 247
    Forum Member
    FraserGJ wrote:
    I've got the channel but its blank - signal is coming and going :cry:

    Same here - as happens with those forgein channels on Eurobird. Guess it is on same beam.
  • [Deleted User][Deleted User] Posts: 390
    Forum Member
    Signal is fine here, but a bit low.
    I think it is encryped. Can anyone confirm?

    Mark
  • bayardsbayards Posts: 1,993
    Forum Member
    ✭✭✭
    Don't forget that IBC show is on in Amsterdam, following IFA in Berlin....like last year they may switch off once the show is over....

    H
  • [Deleted User][Deleted User] Posts: 3,008
    Forum Member
    ✭✭✭
    is it DVB-S or DVB-S2?

    MPEG2 or 4? :)
  • [Deleted User][Deleted User] Posts: 390
    Forum Member
    Got it, using DVB Viewer.
    It is showing a colour test pattern with "Trilogy TSG", in 1920 x 1080 25fps.

    Full details:
    11450 MHz
    Symbol rate 14465
    Polarity vertical
    Video PID 308
    PCR PID 8129

    Mark
  • [Deleted User][Deleted User] Posts: 94
    Forum Member
    just blank for me, is it in Mpeg4?

    20% signal strength
  • HarshadHarshad Posts: 5,996
    Forum Member
    Mark200 wrote:
    Got it, using DVB Viewer.
    It is showing a colour test pattern with "Trilogy TSG", in 1920 x 1080 25fps.

    Full details:
    11450 MHz
    Symbol rate 14465
    Polarity vertical
    Video PID 308
    PCR PID 8129

    Mark

    Any chance of a pic for us SD viewers ;)
  • [Deleted User][Deleted User] Posts: 390
    Forum Member
    Harshad wrote:
    Any chance of a pic for us SD viewers ;)

    I have recorded the video, but VERY big file. How do I take a picture of it?
  • [Deleted User][Deleted User] Posts: 106
    Forum Member
    here's a jpeg of the testcard
    bbchdtestcard5ih.th.jpg
  • [Deleted User][Deleted User] Posts: 181
    Forum Member
    Testing 2 HDTV channels, one is exaclty:
    Mark200 wrote:
    It is showing a colour test pattern with "Trilogy TSG", in 1920 x 1080 25fps.

    Full details:
    11450 MHz
    Symbol rate 14465
    Polarity vertical
    Video PID 308
    PCR PID 8129
    and it's mpeg2, the other one is:
    id: Satops TX2
    11498 MHz
    Symbol rate 10125
    Polarity vertical
    PMT pid 32
    Video PID 308
    PCR PID 8190

    I've got a black screen with QUALI HDTV receiver, so I guess it's mpeg4...
  • cjgperscjgpers Posts: 1,768
    Forum Member
    ✭✭✭
    danit wrote:
    I've got a black screen with QUALI HDTV receiver, so I guess it's mpeg4...
    Probably Dirac - something BBC R&D are meant to be demoing at the IBC.
  • farfar Posts: 3,697
    Forum Member
    ✭✭✭
    Mark200 wrote:
    Got it, using DVB Viewer.
    It is showing a colour test pattern with "Trilogy TSG", in 1920 x 1080 25fps.

    Full details:
    11450 MHz
    Symbol rate 14465
    Polarity vertical
    Video PID 308
    PCR PID 8129

    Mark

    Did you build a new filtergraph for this? If so what codecs? I can't get anything using Skyview apart from the Proms broadcast on one of the two frequencies a few days ago :confused: Also do you mean 11450 or 11480? I can't lock onto 11450 but I can to 11480.
  • [Deleted User][Deleted User] Posts: 94
    Forum Member
    what equipment are you lads using
    i just have a standard pci sat card, do i need anything else?
  • FraserGJFraserGJ Posts: 1,814
    Forum Member
    ✭✭✭
    Skybox wrote:
    just blank for me, is it in Mpeg4?

    20% signal strength

    The 11480Mhz one is blank here too (30% signal)

    The 11450 Mark200 posted about I can't find but they are the same parameters as the one I autodetected on 11480

    I'm just getting an error from DVB Viewer "B2C2 MPEG2 Audio/Video Ctrl Interface error" Unknown error code :confused: Stupid pointless error messages :mad:
  • [Deleted User][Deleted User] Posts: 390
    Forum Member
    The 11480 has been running steady all day.

    I'm using DVB Viewer using the elecard MPEG decoder.
    Settings direct from my software are:
    Freq 11480
    Symbol rate 14465
    Polarity vertical
    FEC Auto (think its 3/4)
    Video PID 308
    Service PID 5802
    PMT PID 266
    PCR PID 8129
    LNB selection None
    LOF 9750
    DiseqC None

    Hope this helps. Today, they have been showing excerpts from films, programmes, tennis, Formula 1. It has got me REALLY excited. I cannot wait until broadcasting starts for real.

    Mark
  • FraserGJFraserGJ Posts: 1,814
    Forum Member
    ✭✭✭
    I can't get anything from 11480 :( Nothing at all :cry:

    ProgDVB is just black and DVBViewer just throws that error back which means absolutely nothing to me

    Is it encrypted cos that would explain it I think :eek:
  • [Deleted User][Deleted User] Posts: 390
    Forum Member
    It is not encrypted.
    It took me ages to get it. Just keep trying different things.
    Copy my settings if you have DVB Viewer.
    I've got the paid version of DVB Viewer (if that makes any difference).

    Mark
  • [Deleted User][Deleted User] Posts: 390
    Forum Member
    PS. I cannot get anything from ProgDVB. I don't no why, but DVB Viewer has worked fine.

    Mark
  • [Deleted User][Deleted User] Posts: 390
    Forum Member
    know, not no!
  • [Deleted User][Deleted User] Posts: 390
    Forum Member
    Skybox. I'm just using a SkyStar 2 card on my PC with DVB Viewer and I can pick it up fine.

    Mark
  • [Deleted User][Deleted User] Posts: 94
    Forum Member
    im using a teratec cinergy dvb-s card, i get a signal alright at 21% but no screen
  • FraserGJFraserGJ Posts: 1,814
    Forum Member
    ✭✭✭
    I'm using a Skystar 2 PCI card also and DVB Viewer TE (the free edition with the software)

    My settings for the channel are here

    I'm open to suggestions :( I don't really want to pay for the full version unless its necessary

    ProgDVB is hopeless for HD stuff anyway, but totally blank here on that too
  • [Deleted User][Deleted User] Posts: 390
    Forum Member
    Hi,

    Comparing your settings with mine, I have a PCR PID setting which you don't have. PCR PID is 8129.
    I don't know if that makes any difference, but apart from that all looks fine.

    Mark

    PS. I'd recommend paying for DVB Viewer. You get free updates for life.

    Mark
Sign In or Register to comment.