Options
Error E-OS upgrading to 1.00.06
[Deleted User]
Posts: 2
Forum Member
I today tried upgrading from 1.00.04 to 1.00.06. The automatic upgrade option told me that 1.00.06 was available so I tried to install it. The box powers on & off but then gets stuck at the power-up screen reporting error E-OS.
I have to turn the box off from the main switch and it boots up just fine again in 1.00.04. ( tried it a couple of times )
So then I reset all setting back to factory default & now my box tells me no upgrade is available.
Anyone help with this?
( upgrade to 1.00.04 in March went very smoothly )
I have to turn the box off from the main switch and it boots up just fine again in 1.00.04. ( tried it a couple of times )
So then I reset all setting back to factory default & now my box tells me no upgrade is available.
Anyone help with this?
( upgrade to 1.00.04 in March went very smoothly )
0
Comments
The OAD has failed or been corrupted this is why you receive the E-OS error.
The correct procedure is to carry out Default Settings and then download the software again when it is next released. You will have to wait until Friday to get the software (9th - 11th)
Please could you indicate where explanations of the error codes are listed. On the FAQ there are a couple of codes explained, but not a complete list.
Regards
Guy
I ended up applying the firmware and loader update manually via a null modem cable.
Max
If for any reason you can't do this (like you've got a Mac) try to get hold of a power supply for the masthead amp and plug it in temporarily for the update
Max